4 Communication
Troubleshooting Wi-Fi connection problems
If the unit seems to be connected to the network, but you are having difficulty using the network
connection, tap / Settings / Connections / Wi-Fi. The Network Cards window will open and allow
you to confirm that the connection is appropriately configured as either a Work or Internet
connection.
If you are unable to connect to a network, try connecting to another network without any security,
such as a Wi-Fi hotspot, to determine if the issue is the hardware or the network.
Installing additional software on your unit
Third-party software designed for Microsoft Windows Embedded Handheld is installed by running a
setup program on the PC while the unit is connected over ActiveSync or Windows Mobile® Device
Center.
Some programs are CAB files that need to be transferred to your unit and executed from the unit.
Follow the setup instructions that came with your software. If prompted, perform a reset to
complete the installation.
Working with the camera
Depending upon the configuration of your unit, it may have an integrated digital camera.
To find out if you have a camera installed in your unit, tap / Settings / System / System
Information / CardPort and see if it is listed under Cardport Devices.
Using the camera
1. From the Home Screen, tap Pictures / All Photos to open up Pictures & Videos,
or tap / Pictures & Videos.
2. Tap on Camera.
3.
Lightly press the key halfway to focus the image.
4.
Press until the Enter or the key clicks to take a picture.
5.
Press the key or tap OK to close the picture preview. (Files are saved in File Explorer (under
My Device) / My Documents / My Pictures.)
Note – The camera preserves battery power by going into standby mode after 30 seconds of no camera
usage. Tap the screen or press a button to resume.
Ranger Series Handheld Computer 44
To Next Page
Loading...
Need help?
General
