A Appendix A
Advanced
When tapped, opens the Advanced GPS screen described in the following section.
Advanced GPS page
Restore defaults
When connected to your unit’s GPS receiver:
Tapping the Return to Default Settings will result in the following settings being changed applied to
your unit’s GPS receiver:
Field Setting
NMEA message settings are reset to defaults:
GGA
GSA
GLL
VTG
GSV
RMC
1 sec
1 sec
OFF
1 sec
1 sec
1 sec
COM
The settings are grayed out and cannot be
changed until you disconnect from your
unit’s GPS receiver.
When disconnected from your unit’s GPS receiver:
Tapping the Return to Default Settings will result in the following settings:
Ranger Series Handheld Computer 67
To Next Page
Loading...
Need help?
General
