27
General Information
Ignition Key
1. Key number tag
In addition to operating the steering
lock/ignition switch, the ignition key is
required to operate the seat lock and fuel
tank cap.
When the motorcycle is delivered from the
factory, two keys are supplied together with a
small tag bearing the key number. Make a
note of the key number and store the spare
key and key number tag in a safe place away
from the motorcycle.
Your authorised Triumph dealer can supply a
replacement key cut from details of the key
number or can cut a new key using the
original as a master.
Note:
• One unused lock is supplied with
the motorcycle. This is for use with
the optional accessory top box and
will ensure that, when fitted, the
same key will operate all the locks
on the motorcycle.
ccnf
1
Caution
Do not store the spare key with the
motorcycle as this will reduce all aspects of
security.
To Next Page
Loading...
