EasyManuals Logo

Triumph Sprint ST Handbook

Triumph Sprint ST
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #94 background imageLoading...
Page #94 background image
94
Maintenance and Adjustment
Battery Removal
1. Battery
2. Negative (black) terminal
3. Positive (red) terminal
Remove the seat.
Remove the battery strap.
Disconnect the battery leads, negative (black)
lead first.
Take the battery out of the case.
Battery Disposal
Should the battery ever require replacement,
the original battery must be handed to a
recycling agent who will ensure that the
dangerous substances from which the battery
is manufactured do not pollute the
environment.
Battery Maintenance
Clean the battery using a clean, dry cloth. Be
sure that the cable connections are clean.
The battery is a sealed type and does not
require any maintenance other than checking
the Voltage and routine recharging when
required, such as during storage.
It is not possible to adjust the battery acid
level in the battery; the sealing strip must not
be removed.
Battery Discharge
Warning
Ensure that the battery terminals do not
touch the motorcycle frame as this may
cause a short circuit or spark, which would
ignite battery gases causing a risk of
personal injury.
ccnq
1
2
3
Warning
The battery acid is corrosive and poisonous
and will cause damage to unprotected
skin. Never swallow battery acid or allow it
to come into contact with the skin. To
prevent injury, always wear eye and skin
protection when handling the battery.
Caution
The charge level in the battery must be
maintained to maximise battery life.
Failure to maintain the battery charge level
could cause serious internal damage to the
battery.

Table of Contents

Other manuals for Triumph Sprint ST

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Triumph Sprint ST and is the answer not in the manual?

Triumph Sprint ST Specifications

General IconGeneral
Engine TypeLiquid-cooled, 12 valve, DOHC, in-line 3-cylinder
Displacement1050cc
Bore x Stroke79 x 71.4 mm
Compression Ratio12.0:1
Fuel SystemMultipoint sequential electronic fuel injection
Final DriveX ring chain
ClutchWet, multi-plate
Gearbox6-speed
Rear SuspensionMonoshock with adjustable preload and rebound damping
Rear BrakesSingle 255mm disc, 2-piston caliper
Front Wheel17 x 3.5 in
Rear Wheel17 x 5.5 in
Front Tyre120/70 ZR 17
Rear Tyre180/55 ZR 17
Max Power125 PS / 123 bhp / 92 kW @ 9, 250 rpm
Max Torque104 Nm / 77 ft-lb @ 5, 000 rpm
FrameAluminum beam perimeter
Front Suspension43 mm
Front BrakesTwin 320 mm floating discs, 4 piston calipers
Seat Height805 mm
Dry Weight210 kg
Fuel Tank Capacity20 liters

Related product manuals