Trocen AWC708C Plus - Page 65

AWC708C PLUS Motion Control User Manual
WWW.SZTROCEN.COM
64
Fiugre6-6-1 Motion Parameters Settings Interface
The settings of these parameter items will affect the cutting effect, please
adjust according to your requirements.
Table6-6-1 Motion Parameters Instruction
Name
Instruction
Space Speed
(mm/s)
The movement speed of laser head when there is
no laser output.
Cut Jerk
(mm/s3)
The variation of cutting acc increases or decreases
in unit of 10 thousand each time.
Space Jerk
(mm/s3)
The variation of movement acc when there is no
laser output and it increases or decreases in unit of
10 thousand each time.
Min Acc
The acceleration of laser head when it turns and