Trotec Speedy Series User Manual

- 35 -
Changing the origin during Trotec JobControl automatic positioning (Auto Position ON)
The data sent from FineCut to Trotec JobControl is automatically positioned without entering the job list. Auto-
matically positioned data can also be manually moved to the desired place.
This can be performed when the Trotec UniDrive [UniDrive (Manual Mode)] dialog [Auto Position] check box is
checked. ( P.11 "Check or uncheck the [Auto Position] check box.")
1. Select [Options] in the Trotec JobControl
[Settings] menu.
2. In the [Options] dialog, click [Process
options] - [Automation].
3. [Position first job] - [X], [Y]: Sets the ori-
gin.
4. Check the [Use second job] check box.
• If the [Use second job] check box is unchecked,
it will be automatically positioned in the JobCon-
trol view so that it does not overlap.
5. [Position second job] - [X], [Y]: Sets the
origin for the second and subsequent
jobs.

Trotec Speedy Series Specifications

General

Resolution	Up to 1000 dpi
Laser Type	CO2 laser
Work Area	Varies depending on model
Max. Workpiece Height	Varies depending on model
Laser Power	Varies by model
Software	JobControl
Supported File Formats	AI, BMP, PDF, DXF, PLT, JPG, GIF, TIFF, PNG
Cooling	Air or Water (depending on laser power)
Power Supply	50/60 Hz