Trotec Speedy Series User Manual

- 26 -
Using the laser cutter without printing
This section covers the case where the [Quick Print] check box is checked on the Trotec UniDrive [UniDrive
(Manual Mode)] dialog. ( P.12 "Check or uncheck the [Quick Print] check box.")
1. Create a cut layer using Adobe Illustrator
• Uncheck the [Print] check box.
2. Create the cut data.
3. Select the line color for the cut data from
the Trotec color swatch.
4. Set the media on the Trotec Speedy
Laser Engravers.
• Set it so that it is aligned with the upper left cor-
ner of the laser cutter surface.
5. Adjust the height.
• For more details, please refer to the Trotec
Speedy Laser Engraver operation manual.
6. Click the [Output to TrotecLaser] button
on the FineCut menu.

Trotec Speedy Series Specifications

General

Resolution	Up to 1000 dpi
Laser Type	CO2 laser
Work Area	Varies depending on model
Max. Workpiece Height	Varies depending on model
Laser Power	Varies by model
Software	JobControl
Supported File Formats	AI, BMP, PDF, DXF, PLT, JPG, GIF, TIFF, PNG
Cooling	Air or Water (depending on laser power)
Power Supply	50/60 Hz