7-8
Select
1. Scroll Projects
2. Enter Project ID
Press (1) to scroll through the stored projects, or (2) to
enter a known project ID. Follow the same procedures as
described in the Select section on page 7-3to select or
enter the desired project ID.
To print all projects, press (2). The oven prompts do you
want to output in REDUCED format? To enable a
reduced printout, press
(YES), to enable a standard
printout, press
(NO). A standard printout includes
minute-by-minute burn data. A reduced printout includes
only a header and footer and a summary of the burn data.
While printing the selected project data, the oven displays
Printing data please wait... When finished printing, the oven
returns to the Project Menu.
NOTE
A print operation can be halted using the Abort Print
function described on page 5-38.
DOWNLOAD
The Download function enables the operator to download
project data previously stored in the oven to a computer or
other serial device. Before enabling this function, connect the
serial communications port to the external device and check the
baud rate as described on page 5-34.
NOTE
To ensure proper data transfer, the cable connected
to the serial communications port should not exceed
3 m (10 ft) in length.
To Next Page
Loading...
Need help?
General
