5-14
To turn the Auto-Store function off, press (2). The oven
updates the Auto-Store status, displays a brief
confirmation message, and returns to the Burn Setup
Menu.
Active Project Selected
If the operator attempts to turn the Auto-Store function on and a
project has been selected as active, the oven enables the Auto-
Store function, briefly displays the confirmation message shown
below, and then returns to the Burn Setup Menu.
Automatic Storage
is now ON
Project XXXXXXXXXXXX
Next Sample # XX
No Project Data
If the operator attempts to turn the Auto-Store function on, but
no projects have been created, the oven displays:
No Project Data
do you want to
enable Auto-Store by
creating a project?
To return to the Burn Setup Menu without enabling the
Auto-Store function, press
(NO).
To create a project and enable the Auto-Store function,
press
(YES). The oven displays the screens required to
create a project as described in Chapter 7. When the
project ID is complete, the oven sets the project as active,
briefly displays the confirmation shown above, and then
returns to the Burn Setup Menu.