ICO 5-17
mm/dd/yyyy
Input Start Date
then press ENTER
The top line of the display shows the current setting for the start
date. The date format (in this example, mm = month, dd = day,
and yyyy = year) is the same as that displayed on the default
screen. To change the date format, refer to page 5-34. Use the
numeric keys to enter the desired start date. To move the cursor
back one position, press the (BACK SPACE) key. When finished,
press (ENTER).
If the start date is valid, the oven requests the stop date for the
Auto-Timer as shown below. The stop date is the date after
which the Auto-Timer will not power up the heating element.
mm/dd/yyyy
Input Stop Date
then press ENTER
The top line of the display shows the current setting for the stop
date. Use the numeric keys to enter the desired stop date. To
move the cursor back one position, press the
(BACK SPACE)
key. When finished, press (ENTER).
If the stop date is valid, the oven requests the days for the Auto-
Timer to skip each week:
Skip any days?
1. Sat 2. Sun
3. Both 4. None
Use the numeric keys to select the desired days to be skipped
and press
(4).
The oven then requests the start time for the Auto-Timer as
shown below. The start time is the time of day at which the
Auto-Timer is to turn the heating element on.
To Next Page
Loading...
Need help?
General
