EasyManuals Logo

TSC TTP-244 Pro Series User Manual

TSC TTP-244 Pro Series
39 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
- iii -
CE WARNING:
This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
FCC WARNING:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may
cause harmful interference with radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference, in which
case you will be required to correct the interference at your own expense.
IC WARNING (AVERTISSEMENT):
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conform à la norme NMB-003 du Canada.
CCC 警告:
此为 A 级产品,在生活环境中,该产品可能会造成无线电干扰。在这种情况下,可能需要用户对干扰采
取切实可行的措施。
A 급기기
(업무용 정보통신기기)
기기는 업무용으로 전자파 적합등록을 기기이오, 판매자 또는 사용자는 점을 주위하시기
바라며, 만약 잘못 판매 또는 구입하였을 때에는 가정용으로 교환하시기 바랍니.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TSC TTP-244 Pro Series and is the answer not in the manual?

TSC TTP-244 Pro Series Specifications

General IconGeneral
Resolution203 dpi
Print MethodThermal Transfer / Direct Thermal
Processor32-bit RISC CPU
Weight2.5 kg
Max. Print Width4.25 inches
Max. Print Length90 inches
Memory8 MB SDRAM, 4 MB Flash
InterfaceUSB 2.0
Label Width1 inch to 4.49 inches
Dimensions232 mm (W) x 156 mm (H) x 288 mm (D)
Power SupplyExternal universal switching power supply
Operating Temperature5 ~ 40°C (41 ~ 104°F)
Storage Temperature-40°C to 60°C
Operating Humidity25% to 85% non-condensing
Label Thickness0.06 ~ 0.19 mm (2.36 ~ 7.48 mil)

Related product manuals