TurboChef i3 Service Manual

TROUBLESHOOTING
47
Troubleshooting:
“Write Fail” Message When Loading Menu
Smart Card
USB Device
Are you trying to write to a smart
card or USB device?
YES
NO
YES
Verify the USB device is
securely attached to the
USB port on the oven.
Is the connection from
USB port to control
board OK?
Ensure the cable
connecting the USB
port to the control
board is securely
attached and not
damaged.
NO
Try writing to a new
smart card. Was the
write successful?
YES
Replace the card reader.
If the problem persists,
replace the control
board.
NO
Is the connection from
smart card reader to
control board OK?
NO
Is the USB device
securely attached to the
oven?
Replace the card reader/
USB port. If the
problem persists,
replace the control
board.
Ensure the cable
connecting the reader
to the control board is
securely attached. If
the cable is damaged,
replace it.

TurboChef i3 Specifications

General

Model	i3
Cooking Chamber	Stainless Steel
Cavity Dimensions	14.5 x 16 x 10 inches
Power Requirements	208-240V, 30A
Control Type	Touchscreen