PT - 262
4 BATTERY REPLACEMENT
Note:
1. Put the power switch to Off side.
2. Though the data can be stored for a long time after the battery is removed, you‟d better exchange a new one
as soon as possible to prevent stored data losing.
3. When battery is not in use for a long time, it will self-discharge. So, you need to Charge the battery twice a
year at least when it is not in use and each time for about 6 hours.
Remove the cover and
unscrew the two bolts.
Take out the battery
and exchange it.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO
THE INSTRUCTIONS
To Next Page
Loading...