PT - 262
12 FUNCTIONS IN SYSTEM SET MODE
Attention:
1. If transaction is done, Z daily report must be printed before entering SYSTEM SET mode. Clerks logout
after printing Z daily report.
2. The machine beeps for three times when an error occurs and ERR X is displayed. Press key [C] to stop the
beeps. Please refer to chapter 15 for the error details.
The following items can be set in S mode:
CHANGE TO TRAINING MODE (show in user mode)/CHANGE TO USER MODE (show in training
mode)
CHANGE TO TAX MODE (show in user mode, it will disappear in tax mode)
MACHINE NO. PROGRAM
SET CLERK
SET PROMOTER
OPTION OF DATA UPLOAD
CLEAR SALES DATA
SET LOCAL CURRENCY SYMBOL
SET RECEIPT TYPE
DATE AND TIME SET
SET ALARM POINT FOR TIME DIFFERENCE
EXTERNAL DEVICE SET
FISCAL SET
Shift to SYSTEM SET mode (S mode) by pressing key [CLERK], and than press [CASH] key. Input the manager‘s
number and password, and then press key [CASH] to enter. If you set the purview ‗SYSTEM SET‘ for the clerk, there
is no need to input the manager‘s number and password to enter SYSTEM SET mode.
Press key [↑] or [↓] to select the item you want to set in SYSTEM SET mode.
In SYSTEM SET mode, some function keys are defined as below:
[↑] Shift to the previous item
[↓] Shift to the next item
[CASH] Confirm
[C] Clear the current input / Return to the previous state
12.1 Change to Training Mode/Change to User Mode Setting
If you are in USER mode, this item will be shown as ‗CHANGE TO TRAINING MODE‘; if you are in TRAINING
mode, this item will be shown as ‗CHANGE TO USER MODE‘.
Use key [↑] or [↓] to select ‗CHANGE TO TRAINING MODE‘ or ‗CHANGE TO USER MODE‘ item, and then
press key [CASH] to confirm.
After system prompts: <INPUT ECR NO (8DIGIT)>, input the 8-digit machine number which is marked on the
receipt, and then press [CASH] to confirm.
Waiting for several seconds, system returns to REG mode, and the clerk logouts.
To Next Page
Loading...