TVS PT262 - Print Head and Tail Message; Enlarge Head and Tail Message; Lengthen Multiple for Printing Font; Set Elongate Times of Time Printing in Receipt

PT - 262
55
13.6.5 Print Head and Tail Message?
This function is to choose whether print head and tail message on receipt.
Use key [↑] or [↓] to select ‗PRINT HEAD AND TAIL MESSAGE?‘ item, press key [CASH] to enter this
function.
Input number 1 or 0 to select ‗YES‘ or ‗NO‘.
Note: If both the item „PRINT HEAD LOGO?‟ and „PRINT TAIL LOGO?‟ are set to „NO‟, then whether you set
this item to „YES‟ or „NO‟, the message will be printed.
13.6.6 Enlarge Head and Tail Message?
This function is to choose whether enlarge head and tail message.
Use key [↑] or [↓] to select ‗ENLARGE HEAD AND TAIL MESSAGE?‘ item, press key [CASH] to enter this
function.
Input number 1 or 0 to select ‗YES‘ or ‗NO‘.
13.6.7 Lengthen Multiple for Printing Font
This function is to set the font size.
Use key [↑] or[↓] to select ‗LENGTHEN MULTIPLE FOR PRINTING FONT‘ item, press key [CASH] to enter
this function.
After system prompts: <FONT HEIGHT (0~4)>, input a digit which range from 0 to 4. ‗0‘ represents the smallest
font, and ‗4‘ represents the largest font.
Press [CASH] key to confirm your setting.
13.6.8 Set Elongate Times of Time Printing In Receipt
Here you can set the date and time‘s size, which is printed on the receipt.
Use key [↑] or [↓] to select ‗SET ELONGATE TIMES OF TIME PRINTING IN RECEIPT‘ item, press [CASH]
key to enter.
System prompts: <INPUT DATE-TIME HEIGHT (0~4)>, 0 is the smallest size, and 4 is the largest size. Input the
size number, which is range from 0 to 4, and press key [CASH] to confirm.
13.6.9 Set Receipt Format
This function is to set the receipt format. There are five columns on the receipt: name, discount, price, quantity and
amount. Set each column width here. The total width cannot be more than 29 characters.
Use key [↑] or [↓] to select ‗SET RECEIPT FORMAT‘ item, and then press key [CASH] to enter.
System prompts: <Input Name Width (4)>, input the name column width not less than 4, and then press [CASH]
key to confirm. The default setting is 4.
System prompts: <Input Discount Width (6)>, input the discount column width not less than 4, and then press