PT - 262
PRN PLU REP WHEN CLEAR DAILY REP?
Whether print PLU report when clear daily report?
CLEAR DAILY REP & PLU REP?
Whether clear PLU report when clear daily report?
PRN PLU RTN REP WHEN CLEAR DAILY REP?
Whether print PLU return report when clear daily report?
CLEAR DAILY REP & PLU RTN REP?
Whether clear PLU return report when clear daily report?
CLEAR DAILY REP & SALES GRANDTOTAL?
Whether clear sales grand total when clear daily report?
RESET RECEIPT NO WHEN CLEAR DAILY REP?
Whether reset receipt number when clear daily report?
RESET Z1 COUNT WHEN CLEAR DAILY REP?
Whether reset Z1 count number when clear daily report?
13.9 Receipt Inquire
Note: The receipt you inquire is not non-sale receipt, so whether set the item „RECEIPT
SET/PRINT NON-SALE RECEIPT?‟ to „YES‟ won‟t affect this function below.
13.9.1 Print PLU List
This function is to print PLU information.
Use [↑] or [↓] to select ‗PRINT PLU LIST‘, press [CASH] key to enter.
Syst
e
m
prompts:
<PLU
SERI
AL
(XXXX
XXXX)>,
input
the
4-digit
start
PLU
seri
al
number
and
the
4-digit
end
PLU serial number, then press [CASH] key to print PLU data. (For example, print the data of No.1~60 PLU, here
input 00010060 [CASH].)
If you press [CASH] key directly without inputting serial number, it will print all PLU data. Press [FEED] key to
stop printing.
13.10 Barcode Set
13.10.1 13 Code Type
This cash register supports 13 digits EAN-13 code and 8 digits EAN-8 code. For EAN-13 code, when the first digit
of barcode is 2, it is defaulted as inner barcode. Generally, the last digits used for checksum. Ten types inner barcode
starting with 20~29 can be selected from 55 types of barcode.
Use key [↑] or [↓] to select ‗13 CODE TYPE‘ item, and press key [CASH] to enter.
After system prompts: <FIRST 2 CODE>, input 2 digits starting code, press [CASH] key to confirm. The first digit
must be 2.
After system prompts: <BARCODE TYPE (0~55)>, input barcode type, press [CASH] key to save the setting.
To Next Page
Loading...