EasyManua.ls Logo

TVS PT262 - Time Set; Set Alarm Point for Time Difference; External Device Set; RS232 Device Set

TVS PT262
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PT - 262
43
12.10.2 Time Set
Use key [] or [] to select DATE AND TIME SET item, and then press [CASH] to enter.
Use key [] or [] to select TIME SET item, and then press [CASH] to enter.
After system prompts: <TIME (HHMMSS)>, input the time, and then press [CASH] to confirm.
The time format is HHMMSS. HH stands for the hour (00 to 23); MM stands for the minute (00 to 59); SS stands
for the second (00 to 59).
For example, set time 14:10:30:
Press [1][4][1][0][3][0][CASH]. A receipt will be printed with the time and date on it.
12.11 Set Alarm Point for Time Difference
This function is used to set the warning minutes for time difference between ECR and PC. If the time difference
between ECR and PC is over the warning minutes, the machine will give an alarm.
Use key [] or [] to select SET ALARM POINT FOR TIME DIFFERENCE item, and then press [CASH].
System prompts: <INPUT WARNING TIME (MINUTE)>. Input the warning minutes here, and then press [CASH]
confirm.
12.12 External Device Set
12.12.1 RS232 Device Set
The machine has a RS232 port which is used to connect to PC or some external devices with a communication
cable.
Use key [] or [] to select RS232 DEVICE SET item, and press key [CASH] to enter this function.
System prompts: <0.SCANNER 2.SCALE 5.RECEIPT PRINTER>, input number 0, 2 or 5 to choose a type and
then press [CASH] to confirm.
12.12.2 Set Scale Type
ECR is supported to connect with an external scale. Before using, the setting is necessary.
Use [] or [] key to select SET SCALE TYPE item, and then press [CASH] to enter.
System prompts: <SCALE TYPE (0.FTP 1.ANGEL 2.SNOWREX 3.Embedded Scale 4.HMS weighing machine)>.
Input a number to choose one type of scale, and then press [CASH] key to confirm.
12.12.3 Set Receipt Printer
Use [] or [] key to select SET RECEIPT PRINTER item, and then press [CASH] to enter.
Use [] or [] key to select NO USE or TVS PRINTER, and then press [CASH] to confirm.
If TVS PRINTER is set, users can set blank spaces for printing, so that the paper cutter on your printer cuts the

Table of Contents