An optional radio door contact (Tynetec P/No. ZXT830) can be used to monitor if a resident leaves their flat during a
preset time period each day. The start and stop times can be set on an individual flat basis. If a resident leaves their
flat during the set period, a wandering alarm will be reported.
Client Wandering Programming can only be performed from the Manager’s Panel designated as the Controller.
Log on using the Manager (or Engineer) password and touch the Programming button.
Programming will always open at the Program Date Time option, select the Client Wander option from the Program
Setting drop-down menu.
Enter a Flat ID and press the Request button to view the current Client Wandering settings for any flat number.
Set the Wander Start Time/Wander End Time period.
Set the Wander Enabled check box to enable the feature (clear the check box to disable).
Set the Monday to Sunday check boxes that the Client Wandering times are active.
Once these details have been entered set press the Send button to update the XT2 system.
To Next Page
Loading...
