UAZ PICKUP - Page 183

183
Rear lamps are installed on the rear side of the bodyshell
(for UAZ PATRIOT, UAZ PICKUP).
Replace tail lamps from the motor vehicle cabin. Remove
catch 1 (Fig. 9.38) of lower cap holder 2, pull cap 3 and remove
the holder from the upholstery orice, then turn the cap. You can
replace any lamp (Fig. 9.39) by taking out the sockets with lamps
by rotating counter-clockwise. Replace the holder and the catch
if necessary.
Fig. 9.38. Hatch of tail
lamp access:
1 — catch of holder cap;
2 — holder cap; 3 — cap.
Fig. 9.36 Side T/Signal:
1 — catches; 2 — socket.
Fig. 9.37. Rearview mirror
with side T/Signal