74
Single press of key “Set -” leads to stepwise decrease of the
target speed by 1 km/h.
Pressing of key “Set +” for more than 0.5 s will smoothly increase
the vehicle speed. New speed value changes to the current speed
value at the moment when the key is released. The acceleration
regime is limited to 150 km/h.
Pressing of key “Set -” for more than 0.5 s will smoothly
decrease the speed. New speed value changes to the current speed
value at the moment when the key is released. The deceleration
regime is limited to 40 km/h.
Single pressing of keys “Set +” or “Set -” in overtaking mode
(item 4) will set the current speed as the target one.
4. Overtaking mode.
If the accelerator pedal is pushed, CC function will switch to
the overtaking mode which leads to the speed increase. After the
accelerator pedal is released CC function will automatically reduce
the speed to the target value.
At changing of the acceleration (long pressing of “Set +”) or
deceleration mode (long pressing of “Set -”) to overtaking mode the
target speed will change to the current speed value at the moment
the accelerator pedal is depressed.
5. Gear shift mode.
Gear shift mode allows to temporarily deactivate CC func-
tion during gear shift from the moment when the clutch pedal is
depressed and automatically resume the function after the clutch
pedal is released.
The gear shift is possible for the gears not lower than third.
6. Deactivation.
CC function is deactivated with saving the target speed in the
memory of ECU in the following cases:
– if the brake pedal is depressed;
– if the clutch pedal is depressed for more than 5 s in the gear
shift mode (item 5);
To Next Page
Loading...
