Unify OpenScape IP 35G SIP - Settings for Multiline (Keyset); Setting the Time for a Delayed Ringer

128 Making calls with multiple lines
Settings for MultiLine (Keyset)
The details for each keyset line contain supplementary information for the user.
The following uneditable fields are displayed:
•Address
– Displays the phone number for the line
• Ringtone on/off
– Displays whether this line’s ringtone is active
• Selection sequence
– Displays the priority of each line seizure when the handset is lifted or the
loudspeaker key for this line is pressed
Setting the time for a delayed ringer
Specify the length of time before a held call should be signalled on a line.
z
You can also configure this setting via the WBM interface  Page 198.
Settings Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec.j Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the required line (for example, line 1).
Select and confirm the option shown.
j Enter and confirm a delay value.
Select and confirm the option shown.
You can activate and deactivate the set delay time for all line keys using a func-
tion key  Page 75.
Settings
User
Configuration
Keyset
Lines
Line 1 f
Ring delay f
Save & Exit l