Unify OpenScape IP 35G SIP - Resetting User Data; Initiating the Reset

186 Individual phone configuration
Resetting user data
The following user-specific settings changed via the phone menu or the WBM
interface can be reset to factory settings.
• Display contrast
• Language setting
• Audio settings
– Volumes
–Settings
• Call lists
– All entries are deleted
• Programmable keys
– All personalised programming is deleted (see also
 Page 76).
Attention: All data is reset without a warning tone.
Initiating the reset
Settings Press the key shown until the "Menu" tab is active.
Select and confirm the option shown.
Confirm.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown. The user data is reset to factory settings.
or
To cancel the process.
Settings
User
Reset
Reset all user data?
Cancel?