OpenScape Voice functions 149
For call rejection
As for selective call acceptance, you can create a selection list with the phone
numbers of parties from whom you are not willing to accept calls. Your adminis
-
trator knows how long this list may be in the OpenScape Voice used on site in
your facility.
A call is not connected if the caller’s phone number matches a number in the se-
lection list; the caller is notified that the called party rejects calls from this num-
ber. If the caller’s number is not in the selection list, the call is to you as usual.
^ Lift the handset.
j Enter the code (see the table of codes Page 163).
Various announcements deliver the following information:
• the name of the feature (selective call rejection)
• the current status (active or inactive)
• the current scope of the selection list.
These announcements are followed by verbal user prompts that let you:
• add entries to the selection list
• delete entries in the selection list
• check the selection list
• activate or deactivate the function.
To Next Page
Loading...
