Unify OpenScape IP 35G SIP - Configuring Call Forwarding

Enhanced phone functions 79
Configuring call forwarding
z
You can also configure this setting via the WBM interface  Page 198.
Settings Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec.j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Configuring forwarding
Select and confirm the option shown.
For a description of the settings, see chapter ”Standard call forwarding”
 Page 56.
For a description of the settings, refer to section ”Standard call forwarding”
 Page 56 or ”Call forwarding by call type”  Page 62.
You can also enter the call forwarding settings via the Forwarding key
(
 Page 57).
Settings
User
Configuration
Incoming calls
Forwarding?
Settings?