56 Call forwarding
Call forwarding
Depending on the settings made by administrator, standard call forwarding may
be configured for the phone or alternatively a forwarding call by type option that
is supported by OpenScape Voice
Page 62.
Standard call forwarding
You can forward calls for your phone to another phone. You can also change,
activate and deactivate call forwarding during a call. The Forwarding function
must have been activated by administrator.
Three forwarding conditions can be programmed in the forwarding menu:
• Unconditional
•Busy
• No reply ({1}s)
Because of its direct impact, "Unconditional" call forwarding has the highest pri-
ority followed by "No reply" and "Busy".
If active, "Unconditional" call forwarding is indicated on the display when the
phone is idle.
Forwarded calls can be logged in a call list (see Page 24).
The menu Forwarding offers you three types of call forwarding:
Unconditional
Destination phone number
Busy
Destination phone number
No reply ({1}s)
Destination phone number
A phone number may already be assigned to each call forwarding type. For ex-
ample, one Destination could be Destination 12345.
Using call forwarding
The following functions are available for activating and deactivating call forward-
ing and configuring it in accordance with your requirements:
• ”Activate or deactivate immediate forwarding” Page 57
• ”Saving destination phone numbers for call forwarding”
Page 58
• ”Edit favourites”
Page 58
• ”Copy and insert destination phone numbers”
Page 59
• ”Assign a destination phone number for call forwarding”
Page 60
• ”Activate/deactivate call forwarding”
Page 60
• ”Defining the ring duration before call forwarding on no reply”
Page 61
On multi-line telephones ( Page 12), you can only configure call forward-
ing for the primary line.
Alternatively, call forwarding can be programmed on one or more keys with
a fixed destination and a predefined forwarding or call type
Page 73.
To Next Page
Loading...
Need help?
General