Programmable keys 75
Using programmed keys
The use of programmed functions depends on the phone’s status. The relevant
display appears once you have pressed a key.
Example 1: Calling saved number
Prerequisite: The idle menu is displayed on the graphic display.
S Press one of the three keys Forward, Pick up or DND with the saved contact. Press
key for stored contact. Connection setup is shown in the display.
Example 2: Call Waiting toggle Activating/
deactivating
You can press a key to activate or deactivate call waiting functionality, even dur-
ing a call. The prerequisite for this is that a second call is permitted ( Page 90).
By default a second call is permitted.
T Press one of the three keys Forward, Pick up or DND with the function "Call Wait-
ing toggle". Press the "Call Waiting toggle" key. The key goes out. The second
call function is deactivated. The call is rejected or forwarded.
Example 3: Immediate ring
This function allows you to switch the preset delay ( Page 128) on and off for
all line keys. By default the delay is set, the key does not illuminate.
S Press one of the three keys Forward, Pick up or DND with the function "Immedi-
ate ring". Press the "Immediate ring" key. The key lights up. The delay ringtone
is disabled. An incoming call rings immediately regardless of what delay time is
configured.
To Next Page
Loading...
