Unify OpenScape IP 35G SIP - Switching to the Held Party (Alternating); Putting on Hold and Retrieving Successively or Simultaneously

50 Basic functions
Switching to the held party (alternating)
Prerequisite: You are conducting a consultation call  Page 48 or have accept-
ed a second call  Page 87.
Select and confirm the option shown.
In the first display line, the phone number or name and the duration of the active
connection are displayed.
Ending an alternate operation
Select and confirm the option shown.
The active call is disconnected and the held call is restored.
Putting on hold and retrieving successively or
simultaneously
Putting an active call on hold
Prerequisite: You have a single-line phone and are conducting a consultation
call
 Page 48 or have accepted a second call  Page 87.
Hold Press the Hold key. The key flashes. The consultation or second call and the
first call are put on hold.
Retrieving the first call
b Switch to the first call.
Hold Press the flashing Hold key. You are connected with the other party. The con-
sultation or second call continues on hold.
Retrieving the second call
d Switch to the held consultation or second call
Hold Press the flashing Hold key. You are connected with the other party. The first
called is put on Hold again.
Alternate? l
You can switch back and forth between two subscribers by repeatedly se-
lecting and confirming "Alternate".
Disconnect & return? f