OpenScape Voice functions 147
Temporarily activating anonymous calling for the next
call
If your administrator activated caller ID transmission for your phone, you can de-
activate this setting for the next call as follows:
^ Lift the handset.
j Enter the code (see the table of codes ïƒ Page 163).
Z Wait until you hear the confirmation tone or an announcement.
j Dial the phone number of the party you want to contact.
Caller ID transmission is reactivated after this call.
Temporarily deactivating anonymous calling for the
next call
If your administrator suppressed caller ID transmission for your phone, you can
enable this setting for the next call as follows:
^ Lift the handset.
j Enter the code (see the table of codes ïƒ Page 163).
Z Wait until you hear the confirmation tone or an announcement.
j Dial the phone number of the party you want to contact. When you end this call,
caller ID transmission is suppressed once again for the next call.
To Next Page
Loading...
Need help?
General