36 Basic functions
Switching from handset to speakerphone
mode
Prerequisite: You are conducting a call via the handset and the microphone and
loudspeaker functions have been activated by administrator.
Speaker Press the key shown.
\ Replace the handset. Proceed with your call.
This is the procedure for country setting US.
For all other country settings the following procedure has to be done:
Speaker and \ Hold down the key and replace the handset. Then release the key and proceed
with your call.
Make note of the two different processes depending on the country setting.
The default country setting is US.
Activate, if necessary, your preferred setting Page 175.
To Next Page
Loading...
