Unify OpenScape IP 35G SIP User Manual

Individual phone configuration 173
Settings
Room character
To ensure that the other party can hear you properly in speakerphone mode, you
can adjust the phone to the room acoustics by choosing one of the following
room character conditions: "Normal", "Echoing", "Muffled"
.
z
You can also configure this setting via the WBM interface  Page 198.
Settings Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec.j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the room character in the context menu (for example, "Nor-
mal").
Select and confirm the option shown.
Ringtone
If your administrator has loaded suitable files to the phone, you can select a re-
altone file in *.mid (*.midi) or *.wav format for the ringer tone. If no individual au-
dio files are available the "pattern" ringtone is preset.
z
You can also configure this setting via the WBM interface  Page 198.
Settings Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec.j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Confirm. Required ringtone file or "pattern." You will immediately hear the asso-
ciated ringer melody. Confirm current ringtone file.
Select and confirm the option shown.
Settings
User
Audio
Settings?
Room character = Normal f
Save & Exit l
Settings
User
Audio
Settings?
Ringer file = Ring file f
Ring file? f
Save & Exit l

Unify OpenScape IP 35G SIP Specifications

General

Brand	Unify
Model	OpenScape IP 35G SIP
Category	IP Phone
Language	English