Unify OpenScape IP 35G SIP User Manual

OpenScape Voice functions 163
Code table for OpenScape Voice functions
Ask your administrator to enter the latest codes in the following table.
Print this page as an overview.
Function Code Description
Making anonymous calls off  Page 146
Making anonymous calls on  Page 146
Making anonymous calls temporarily on  Page 147
Making anonymous calls temporarily off  Page 147
List for selective call acceptance  Page 148
List for selective call rejection  Page 149
Rejecting anonymous calls  Page 150
Accepting anonymous calls  Page 150
Using abbreviated dialling  Page 151
Call tracing  Page 151
Making a line busy on  Page 152
Making a line busy off  Page 152
End of hunt group chain on  Page 153
End of hunt group chain off  Page 153
Edit mode for serial call  Page 154
Edit mode for parallel call  Page 155
Activating a parallel call  Page 155
Deactivating a parallel call  Page 155
Parking a call  Page 156
Unparking a call  Page 156
Active silent monitoring  Page 157
Muted silent monitoring  Page 158
One-way Intercom  Page 160
Two-way Intercom  Page 160
Announcing the local phone number  Page 161
Last answered caller  Page 161
Last dialled caller  Page 161
Picking up out-of-hours calls  Page 162

Unify OpenScape IP 35G SIP Specifications

General

Brand	Unify
Model	OpenScape IP 35G SIP
Category	IP Phone
Language	English