Unify OpenScape IP 35G SIP - Page 84

84 Enhanced phone functions
Setting the hold reminder time
Use the "Hold reminder" function to set the time after which you want to receive
an automatic reminder about a held call.
The minimum value is 3, that is, the reminder is output after three minutes. The
maximum value is 99 minutes. Press 0 to deactivate the delay.
z
You can also configure this setting via the WBM interface  Page 198.
Settings Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec.j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
j Enter a value between 1 and 99 in the input mask and confirm.
Select and confirm the option shown.
Settings
User
Configuration
Connected calls?
Hold rem. delay=3 f
Save & Exit l