17
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
- SH: Press button while using the Shuttle to hold the speed.
z SEARCH : Press once to open the menu to search for recorded files.
z PTZ: Pan/Tilt/Zoom. Press once to access the Pan/Tilt/Zoom/Focus control mode.
Press again to exit.
z MENU: Press button to access Main Menu. Press again to return.
z MULTI (16ch DVR) : Selection button for Screen Division for Live Viewing mode
- Live mode: Selection of Screen Division for Live Viewing mode
(4, 8, 9, 16 screen divisions)
- In order to go back to previous mode, user is required to push “MULTI” button,
after selecting a specific channel.
- Playback mode : Selection button for Screen Division for playback of recording file.
It shows 4, 9,16 divided screen in order of precedence. If you select specific one channel
and in order to get back to each divided channel, you can just click “MULTI” button.
z MULTI (8ch DVR)
- Live mode: Selection button for Screen Division of Screen Division for Live Viewing mode (4,
6, 8, 9 screen divisions)
- In order to go back to previous mode, user is required to push “MULTI” button,
after selecting a specific channel .
- Playback mode:
- In order to go back to previous mode, user is required to push “MULTI” button,
after selecting a specific channel.
z SEQ(16ch DVR)
: Sequential view under live mode. Viewing of all active video input channels sequentially.
If you click “SEQ” button one time, each single channel can be viewed sequentially.
If you double click “SEQ” , it views 4,8,9,16 screen divisions.
This button also can be used for all motions area release purpose on motion detection
set up menu.
z SEQ(8ch DVR)
: Sequential view under live mode. Viewing of all active video input channels sequentially.
If you click “SEQ” button one time, each single channel can be viewed sequentially.
If you double click “SEQ” , it views 4,8,9 screen divisions.
This button also can be used for all motions area release purpose on motion detection
set up menu.
z SEQ(4ch DVR)
: Sequential view under live mode. Viewing of all active video input channels sequentially.
If you click “SEQ” button one time, each single channel can be viewed sequentially.
To Next Page
Loading...