Universal Robots UR5e - Page 62

TÜV NORD Universal Robots e-Series robots are safety approved by
TÜV NORD, a notified body under the machinery directive
2006/42/EC in EU.
CHINA RoHS Universal Robots e-Series robots conform to CHINA RoHS
management methods for controlling pollution by
electronic information products.
KCC Safety Universal Robots e-Series robots have been assessed and
conform to KCC mark safety standards.
KC Registration The Universal Robots e-Series robots have been
evaluated for conformity assessment for use in a work
environment. Therefore, there is a risk of radio interference
when used in a domestic environment.
Delta Universal Robots e-Series robots are performance tested
by DELTA.
Supplier Third Party Certification
Environment As provided by our suppliers, Universal Robots e-Series
robots shipping pallets comply with the ISMPM-15
Danish requirements for producing wood packaging
material and are marked in accordance with this
scheme.
Manufacturer Test Certification
Universal
Robots
Universal Robots e-Series robots undergo continuous
internal testing and end of line test procedures.
UR testing processes undergo continuous review and
improvement.
Declarations According to EU directives
Although EUdirectives are relevant for Europe, some countries outside Europe recognize and/or
require EU declarations. European directives are available on the official homepage: http://eur-
lex.europa.eu.
According to the Machinery Directive, Universal Robots’ robots are partly completed machines, as
such a CE mark is not to be affixed.
You can find the Declaration of Incorporation (DOI) according to the Machinery Directive in the
chapter: Declarations and Certificates.
User Manual UR5e
Copyright © 2009–2023 by UniversalRobotsA/S. All rights reserved.