For your safety
9
Nr. Symbol Anbringungsort
1
Warning sign at the container opening
2
Warning sign at the container opening
("Do not fill liquids that exceed a temperature of 70°C (158°F)"
3
Warning sign at the container opening
4
Name plate at the feed container
5
Indicating label at the MilkShuttle‘s mouting plug (400 V only)
6
Warning sign at the closures of the control electronics housing lid
7
Indicating label dosing pump on the container lid
8
Warning sign above the drain valve of the dosing pump:
(„If the MilkShuttle is taken temporarily out of operation, open the
drain valve in order to drain the dosing pump so that no harm will
occur to the pump during freezing periods“)
L1
L2
400 V
L3
N
PE
DO NOT RUN DRY
NICHT TROCKEN LAUFEN
N DOIT PAS MARCHER A SEC
FÄR EJ KÖRAS TORR