What if...
68
8.3 Determining the operating code
The operating code of the device is important information for the service
technician. Determine the operating code before you call your service technician.
Write down the information so that you have it to hand.
Directly after switching on the MilkShuttle the main screen appears together with
the operating code. If you are in a sub-menu (feed, rinse) and would like to see the
operating code you must press the button on the operating device once in
order to get back to the main menu, then the operating code will be displayed
(here 107A31):
You may determine the version of the language package of your MilkShuttle (see
chapter 4.3, page 16) via the operating code: the fourth character of the operating
code equals the version of the language package of your MilkShuttle firmware. In
case of figure 8/1, the MilkShuttle model is equipped with language package A.
Figure 8/1: Operating code
Language package
107A31107A31
107A31107A31
Operating code
u
To Next Page
Loading...
Need help?
General