USTER HVI 1000 - 6 Safety

USTER® HVI 1000 Instruction Manual
Uster Technologies, Inc. Chapter 1
(3/08) Introduction - Page 1-8
6 Safety
The HVI 1000 system is safe to operate in a normal manner; however, if
the equipment is used in a manner not specified by Uster Technologies,
Inc. the protection provided by the equipment might be impaired.
There are also certain conditions that warrant cautionary statements.
The following warning labels are used to inform the operator and
qualified service technician(s) of the hazardous areas and conditions in
the instrument.
The section below shows the safety labels used on the HVI 1000 .
6.1 Safety Labels
A label is located on each of the
samplers warning of a shear hazard
if the instrument is operated with the
covers open.
A label is located on the comb feed
support tray assembly indicating the
pinch hazard when your hand is in
the area of the brusher.
A label is located on the comb feed
support tray assembly indicating the
crush hazard when your hand is in
the area of the comb transport.