USTER®
HVI 1000
Instruction Manual
Uster Technologies, Inc. Chapter 6
(3/08) System Testing - Page 6-1
Chapter 6 System Testing
1 Overview
The
HVI 1000
system is designed to allow a linear measuring
procedure that includes the Length/Strength, Micronaire and
Color/Trash Modules. Optional modules available for testing are
moisture, NEP, UV, temperature and relative humidity. The streamlined
testing procedure allows one operator to perform all tasks; from
identification entry to cotton sample disposal. After a test series is
completed, the results are compiled by the system's microprocessors and
relayed to the desired host devices.
There are four modes of system testing that can be performed online or
offline (Host Communications ON/OFF). System testing is the only
testing mode that transmits data to the host.
2 System Testing Menu
Figure 6-1: System Testing Menu
To Next Page
Loading...