USTER HVI 1000 - Color Tiles Calibration; Setup Tolerances

USTER® HVI 1000 Instruction Manual
Uster Technologies, Inc. Chapter 5
(3/08) Calibration - Page 5-21
Figure 5-12: Calibration Main Menu
5.1 Color Tiles Calibration
On the CALIBRATION MAIN MENU, highlight Color + Trash in the
Module Window, then highlight your choice of Color Tiles or Trash
Tiles in the Calibration Type window.
At this point you can choose to:
1. Setup Tolerances
2. Setup References
3. Check Calibration
4. View Calibration Results
5.1.1 Setup Tolerances
You must enter a valid password before entering this area.
Figure 5-13: Setup Color Tile Tolerances