USTER®
HVI 1000
Instruction Manual
Uster Technologies, Inc. Chapter 6
(3/08) System Testing - Page 6-3
3 Testing Modes
There are four different testing modes available for system testing.
These are selected in System Testing Options of the Test Setup area of
Configuration. Each mode has specific options that are (and are not)
available.
See Chapter 4, page 5 for a detailed description of each testing mode.
4 Testing Screens
Though testing screens are different in appearance for each Mode (1-4)
of testing, many of the screen items and actions are similar.
4.1 Bale Result List
This list displays the final, overall results for each cotton sample tested.
Figure 6-2: Bale Result List
Note: Depending upon the configuration of your system, the results list
may appear differently than that shown above.
4.2 Items Displayed
Among the items displayed are:
♦ UHML – (Upper Half Mean Length) Cotton length is measured as
the mean length and upper half mean length.
To Next Page
Loading...
