UTECH VS2000 User Manual

Chapter 11: Temperature
VS2000 Vital Signs Monitor Operation Manual 11-3
a) Push and Turn the rotary knob on the monitor to move the cursor. Highlight
the TEMP parameter box and push the knob to access the TEMP parameter
menu.
b) Highlight ALARM and push the knob to select.
c) Choose ON or OFF and push the knob to select.
d) Turn the rotary knob to “OK” or “Cancel” to save or delete your settings.
2. Set High and Low Alarm Limits
a) Push and Turn the rotary knob on the monitor to move the cursor. Highlight
the TEMP parameter box and push the knob to access the TEMP parameter
menu.
b) Highlight ALARM and push the knob to select.
c) Move the cursor to High/Low and push the knob to select.
d) Turn the knob to increase or decrease the number and push it to confirm.
e) Turn the rotary knob to “OK” or “Cancel” to save or delete your settings.
3. Choose Alarm Priority
a) Push and Turn the rotary knob on the monitor to move the cursor. Highlight
the TEMP parameter box and push the knob to access the TEMP parameter
menu.
b) Highlight TEMP ALARM and push the knob to select.
c) Choose Senior, Junior or Medium and push the knob to select.
d) Turn the rotary knob to “OK” or “Cancel” to save or delete your settings.

UTECH VS2000 Specifications

General

Brand	UTECH
Model	VS2000
Category	Monitor
Language	English