UTECH VS2000 User Manual

Chapter 4: Setting up the Monitor
4-6 VS2000 Vital Signs Monitor Operation Manual
1. Press the menu key to pop up the main menu and turn the rotary knob to
move the cursor to the “System” option.
2. Push the rotary knob to access the “System” submenu. Turn the knob to
highlight the “Volume” option.
3. Push the rotary knob to access the volume setup submenu and turn the
knob to highlight the desired volume and push to select.
4. Turn the knob to increase or decrease the volume and push it to exit.
5. Turn the rotary knob to “OK” or “Cancel” button and push it to save or
delete your settings.
4.5.6 LCD Brightness Setup
You can set the brightness of the LCD display. There are seven levels of
brightness. And the default setting is the seventh level.
Figure 4.6: LCD Brightness Setup
1. Press the menu key to pop up the main menu and turn the rotary knob to
move the cursor to the “System” option.
2. Push the rotary knob to access the “System” submenu. Turn the knob to
highlight the “LCD” option.
3. Push the rotary knob to access the LCD setup submenu and turn the knob to
highlight the brightness and push to select.
4. Turn the knob to increase or decrease the level of brightness and push it to
exit.

UTECH VS2000 Specifications

General

Brand	UTECH
Model	VS2000
Category	Monitor
Language	English