Chapter 15: Specification
15-2 VS2000 Vital Signs Monitor Operation Manual
15.4 ECG
Heart Rate Range:
Heart Rate Accuracy:
QRS Detection Range:
Pace Pulse Detection:
Detection Duration:
Alarm Ranges Heart Rate:
Heart Rate Averaging:
Lead Selection:
Display Gain Settings:
Input Range:
Frequency Response:
Input Impedance:
CMRR:
Defibrillation Protection:
I-Leakage:
Patient Isolation:
Display Waveform:
Update Rate Digits:
15.5 SpO
2
SpO
2
Range:
SpO
2
Accuracy:
Pulse Rate Range:
Pulse Rate Accuracy:
SpO
2
Alarm Ranges:
High:
Low:
Calibration:
20-350 bpm
±2 bpm or ±2% (whichever is greater)
0.5 to 5 mV
±2 mV to ±700 mV amplitude
0.1 - 2.0 ms
High: 20-350 bpm and OFF
Low: 20-350 bpm and OFF
Fixed 8 second averaging
I, II, III, V, aVR, aVL, or aVF (5-lead)
X 1/4, X1/2, X1, X2, X4
-5.0 mV to +5.0 mV
0.05 Hz to 40 Hz
>5 Mohms differential, as required and
tested per ANSI/AAMI EC-13.
100 dB @ 60 Hz
Yes
< 10 uA
> 4000 VAC
120 Hz; 6.25, 12.5, 25, or 50 mm/sec
0-100% Functional Saturation
± 2% @ 70-100%
<70% unspecified
20-350 bpm
± 2 bpm or ± 2% (whichever is greater)
50-100% and OFF
50-100% and OFF
Factory calibrated over range 50% to 100%
SpO
2
using human blood samples to