Chapter 13: Maintenance and Troubleshooting
13-6 VS2000 Vital Signs Monitor Operation Manual
Figure 13.2: Demo Mode
To turn on the demo mode:
1. On the maintenance menu, highlight DEMO and push the knob to select.
2. Turn the rotary knob to highlight OFF and push the knob to select.
3. Turn the knob to ON and push to select.
4. Turn the rotary knob to highlight YES and push the knob to select. An
attention will pop up to remind if you are ready to the demo mode. Turn the
rotary knob to highlight OK and push to select.
DEMO will be displayed, gray, in the middle of the display.
To turn off the demo mode:
1. On the maintenance menu, highlight DEMO and push the knob to select.
2. Turn the rotary knob to highlight ON and push the knob to select.
3. Turn the rotary knob to OFF and push to select.
4. Press the OK button to turn the demo mode off.
The monitor will return to normal operating conditions and will collect patient
data.
To Next Page
Loading...
Need help?
General
