Chapter 9: Non-invasive Blood Pressure
VS2000 Vital Signs Monitor Operation Manual 9-11
NOTE! Failure to place the cuff cap on the hose will allow water to enter
the bladder. This will cause the cuff to malfunction and will
damage the monitor.
2. Pre-clean the cuff by removing contaminate material, hair, and debris.
3. Wash the cuff in a regular load of laundry, or hand-wash.
4. Allow the cuff to air-dry.
CAUTION! Do not place the cuff in the dryer.
To Next Page
Loading...
Need help?
General
