Name: Vacon 10
Brand: Vacon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

2 • vacon safety

Tel. +358 (0)201 2121 • Fax +358 (0)201 212205

After disconnecting the frequency converter from the mains,

wait until the fan stops and the indicators on the display go

out. Wait 5 more minutes before doing any work on Vacon 10

connections.

The motor can start automatically after a fault situation, if the

autoreset function has been activated.

Table of Contents2
Safety4
Safety Instructions6
Before Running the Motor7
Receipt of Delivery8
Maintenance9
Warranty10
Manufacturer's Declaration of Conformity11
Installation12
Vacon 10 Dimensions13
Cooling15
Power Losses16
EMC Levels21
Cabling and Connections23
Control Cabling24
Screw of Cables26
Cable and Fuse Specifications28
General Cabling Rules31
Stripping Lengths of Motor and Mains Cables32
Commissioning33
Fault Tracing35
Vacon 10 Application Interface38
Control I/O40
Control Panel41
Keypad42
Navigation on the Vacon 10 Control Panel44
Standard Application Parameters52
Motor Settings (Control Panel: Menu PAR -> P1)55
Start / Stop Setup (Control Panel: Menu PAR -> P2)56
Frequency References (Control Panel: Menu PAR -> P3)57
Ramps and Brakes Setup (Control Panel: Menu PAR -> P4)58
Digital Inputs (Control Panel: Menu PAR -> P5)59
Digital Outputs (Control Panel: Menu PAR -> P8)60
Protections (Control Panel: Menu PAR -> P13)61
PI Control Parameters (Control Panel: Menu PAR -> P15)62
System Parameters63
Parameter Descriptions65
Start / Stop Setup (Control Panel: Menu PAR -> P2)70
Frequency References (Control Panel: Menu PAR -> P3)77
Ramps & Brakes Setup (Control Panel: Menu PAR -> P4)78
Digital Inputs (Control Panel: Menu PAR -> P5)82
Analogue Inputs (Control Panel: Menu PAR -> P6)83
Digital Outputs (Control Panel: Menu PAR -> P8)84
Analogue Outputs (Control Panel: Menu PAR -> P9)85
Protections (Control Panel:menu Par->P13)86
Automatic Reset (Control Panel: Menu PAR -> P14)90
PI Control Parameters (Control Panel: Menu PAR -> P15)91
Application Setting (Control Panel: Menu PAR->P17)92
Modbus RTU94
Modbus Process Data95
Technical Data97
Power Ratings99
Vacon 10 – Mains Voltage 115 V100
Vacon 10 – Mains Voltage 575 V101

Brand	Vacon
Model	10
Category	Controller
Language	English

Vacon 10 User Manual

Table of Contents

Other manuals for Vacon 10

Questions and Answers:

Vacon 10 Specifications

Related product manuals