Vacon 10 User Manual

INDEX
Document: DPD00717C
Version release date: 20.11.2011
1. Safety 1
1.1 Warnings 1
1.2 Safety instructions 3
1.3 Earthing and earth fault protection 3
1.4 Before running the motor 4
2. Receipt of delivery 5
2.1 Type designation code 5
2.2 Storage 5
2.3 Maintenance 6
2.3.1 Capacitor recharge 6
2.4 Warranty 7
2.5 Manufacturer’s declaration of conformity 8
3. Installation 9
3.1 Mechanical installation 9
3.1.1 Vacon 10 dimensions 10
3.1.2 Cooling 12
3.1.3 Power losses 13
3.1.4 EMC levels 18
3.1.5 Changing the EMC protection class from C2 or C3 to C4 18
3.2 Cabling and connections 20
3.2.1 Power cabling 20
3.2.2 Control cabling 21
3.2.3 Screw of cables 23
3.2.4 Cable and fuse specifications 25
3.2.5 General cabling rules 28
3.2.6 Stripping lengths of motor and mains cables 29
3.2.7 Cable installation and the UL standards 29
3.2.8 Cable and motor insulation checks 29
4. Commissioning 30
4.1 Commissioning steps of Vacon 10 30
5. Fault tracing 32
6. Vacon 10 application Interface 35
6.1 Introduction 35
6.2 Control I/O 37
7. Control panel 38
7.1 General 38
7.2 Display 38
7.3 Keypad 39
7.4 Navigation on the Vacon 10 control panel 41
7.4.1 Main menu 41

Vacon 10 Specifications

General

Brand	Vacon
Model	10
Category	Controller
Language	English