Vacon optea - Page 143

EtherNet/IP vacon • 143
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
9
9.1.5.4 Supported CIP and Vendor Objects
The Communication Interface supports the following object classes.
296
d
/ 128
h
Invalid target to originator size
297
d
/ 129
h
Invalid configuration application path
298
d
/ 12A
h
Invalid consuming application path
299
d
/ 12B
h
Invalid producing application path
306
d
/ 132
h
Null forward open function not supported
517
d
/ 205
h
Parameter error in unconnected request service
789
d
/ 315
h
Invalid segment in connection path
Range 320h – 7FFh are vendor specific
800
d
/ 320
h
Internal: Connection disabled
64258
d
/ FB02
h
Internal: Bad socket
64259
d
/ FB03
h
Internal: Bad originator to target net parameter
64260
d
/ FB04
h
Internal: Bad target to originator net parameter
64261
d
/ FB05
h
Internal: Bad UDP port
64262
d
/ FB06
h
Internal: Join multicast
64263
d
/ FB07
h
Internal: Prepare IO packet
64267
d
/ FB0B
h
Internal: Consumption
64268
d
/ FB0C
h
Internal: FW close
64270
d
/ FB0E
h
Internal: Adapter stopped
Table 110. CIP Objects
Type Class Object Details
Required by Ether-
Net/IP
1 Identity Object See chapter 9.2.1.1
2 Message Router Object See chapter 9.2.1.2
4 Assembly Object See chapter 9.2.1.6
6 Connection Manager Object See chapter 9.2.1.3
245d / F5h TCP/IP Interface Object See chapter 9.2.1.4
246d / F6h Ethernet Link Object See chapter 9.2.1.5
Required by Drive
Profile
40d / 28h Motor Data Object See chapter 9.2.1.7
41d / 29h Control Supervisor Object See chapter 9.2.1.8
42d / 2Ah AC/DC Drive Object See chapter 9.2.1.9
Vendor-Specific
160d / A0h Vendor Parameters Object See chapter 9.2.2.1
161d / A1h Motor Control Mode Object See chapter 9.2.2.3
162d / A2h Fault History Object See chapter 9.3.3.3
190d / BEh
Assembly Instance Selector
Object
See chapter 9.2.2.2
Table 109. Connection Manager Object Error codes
Extended Status Descriptions