VAF instruments OILCON MARK 6M - 3.4 SKID; 3.5 SAMPLE PUMP

16
3.4 SKID
Sample flowrate between 450 and 550 l/h
Sample inlet pressure 3 bar (nom.), 6 bar (max.) (0.3 MPa nom., 0.6 MPa max.)
Fresh water supply 3 bar (nom.), 6 bar (max.) (0.3 MPa nom., 0.6 MPa max.)
average consumption 0,13 l/min
max. consumption 8 l/min
Water temperature range 10 °C – 65°C, in accordance with IMO Resolution MEPC 108 (49)
Ambient temperature -20 °C – +55 ºC
Humidity range 0 – 95 % RH
Protection class IP 65
Mounting wall mounting, see drawing 0806-1288 for dimensions
Connections
Fresh water and sample water 15 mm tube coupling
Air to valves 6 mm tube coupling
Air to pneumatic pump 8 mm tube coupling
Cable to EPU M20 x 1,5 (cable diameter 10 – 14 mm)
Wire size connectors Min-max 0,2 – 2,5 mm
2
3.5 SAMPLE PUMP
Electrical supply 3-phase 380–420 VAC, 50Hz, 1.1 kW, 2.5 A
or 3-phase 440–480 VAC, 60 Hz, 1.3 kW, 2.5 A
Power consumption 1300 W
Isolation class F, IEC 34-1
Protection class IP 55
Mounting wall mounting, see drawing 0806-1076 for dimensions
Connections
Sample water 15 mm tube coupling
Cable M20 x 1,5 (cable diameter 10 – 14 mm)
Wire size connectors Min-max 0,2 – 2,5 mm
2