VAF instruments OILCON MARK 6M - Power Supply Starter Box and Cable Connection Skid

39
6.8.4 Power supply starter box and cable connection skid
Reference drawings
 Control drawing for Mark 6M Oil Discharge Monitor 0806-0005
 Electrical connection diagram Ballast Monitor Mark 6M MEPC 108(49) 0806-2048
Q
P
S
R
T
P. Power supply to starter box IC-08
Q. Power supply from sample pump to starter box IC-09
R. Power supply from starter box to sample pump IC-09
S. 24 V DC start signal IC-06 (see Figure 12 Item I)
T. Connection Cable EPU  Skid IC-02 (see Figure 12 Item J)
(Cable Item T must be installed according to section 6.5.1)
Figure 21
Figure 20
Figure 19